Skip navigation
  • Menu
    • News
    • Image
    • Downloads
    • Contact
  • Products
  • Portal
 
  • ELEKTROMATEN SI ATEX

    ELEKTROMATEN SI ATEX

    “Safedrive” ELEKTROMATEN SI are drives for industrial doors to be used in potentially explosive atmospheres - which require an anti-fallback device. The patented safety brake is built into the gear. The drive unit is fitted directly to the door shaft.

    • SG85F

      Output torques:  250 - 400 Nm

      • SI 25.15 Ex-e T3

        Technical data

        Technical data

        Output torque: 250 Nm
        Output speed: 15 rpm
        Hollow shaft (Ø): 30 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (2.2 MiB)
        Installation drawing (3.7 MiB)
        Installation instructions (5.8 MiB)
        Spare parts (656.8 KiB)
      • SI 25.15 Ex-de T3

        Technical data

        Technical data

        Output torque: 250 Nm
        Output speed: 15 rpm
        Hollow shaft (Ø): 30 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (2.2 MiB)
        Installation drawing (1.4 MiB)
        Installation instructions (4.7 MiB)
        Spare parts (656.8 KiB)
      • SI 25.15 Ex-de T4

        Technical data

        Technical data

        Output torque: 250 Nm
        Output speed: 15 rpm
        Hollow shaft (Ø): 30 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (2.2 MiB)
        Installation drawing (1.4 MiB)
        Installation instructions (4.7 MiB)
        Spare parts (656.8 KiB)
      • SI 40.15 Ex-e T3

        Technical data

        Technical data

        Output torque: 400 Nm
        Output speed: 15 rpm
        Hollow shaft (Ø): 40 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (2.2 MiB)
        Installation drawing (3.7 MiB)
        Installation instructions (5.8 MiB)
        Spare parts (656.8 KiB)
      • SI 40.15 Ex-de T3

        Technical data

        Technical data

        Output torque: 400 Nm
        Output speed: 15 rpm
        Hollow shaft (Ø): 40 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (2.2 MiB)
        Installation drawing (1.4 MiB)
        Installation instructions (4.7 MiB)
        Spare parts (656.8 KiB)
      • SI 40.15 Ex-de T4

        Technical data

        Technical data

        Output torque: 400 Nm
        Output speed: 15 rpm
        Hollow shaft (Ø): 40 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (2.2 MiB)
        Installation drawing (1.4 MiB)
        Installation instructions (4.7 MiB)
        Spare parts (656.8 KiB)
    • SG115F

      Output torque:  800 Nm

      • SI 80.12 Ex-de T4

        Technical data

        Technical data

        Output torque: 800 Nm
        Output speed: 12 rpm
        Hollow shaft (Ø): 55 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (2.2 MiB)
        Installation drawing (832.1 KiB)
        Installation instructions (5.1 MiB)
        Spare parts (795.3 KiB)
  • ELEKTROMATEN KE ATEX

    ELEKTROMATEN KE ATEX

    ELEKTROMATEN KE are drives for industrial doors to be used in potentially explosive atmospheres. The door shaft is driven by a chain-transmission. To prevent doors falling back a safety brake of the appropriate size is required.

    • SG50

      Output torque:  90 Nm

      • KE 9.24 Ex-e T3

        Technical data

        Technical data

        Output torque: 90 Nm
        Output speed: 24 rpm
        Output shaft (Ø): 25 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (1.6 MiB)
        Installation drawing (2.3 MiB)
        Installation instructions (6.2 MiB)
        Spare parts (660.1 KiB)
      • KE 9.24 Ex-de T4

        Technical data

        Technical data

        Output torque: 90 Nm
        Output speed: 24 rpm
        Output shaft (Ø): 25 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (1.6 MiB)
        Installation drawing (2.3 MiB)
        Installation instructions (5.2 MiB)
        Spare parts (660.1 KiB)
    • SG85

      Output torque:  400 Nm

      • KE 40.24 Ex-de T4

        Technical data

        Technical data

        Output torque: 400 Nm
        Output speed: 24 rpm
        Output shaft (Ø): 40 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (1.6 MiB)
        Installation drawing (1,015.4 KiB)
        Installation instructions (5.1 MiB)
        Spare parts (656.8 KiB)
    • SG115

      Output torque:  800 Nm

      • KE 80.12 Ex-de T4

        Technical data

        Technical data

        Output torque: 800 Nm
        Output speed: 12 rpm
        Output shaft (Ø): 55 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (1.6 MiB)
        Installation drawing (816.1 KiB)
        Installation instructions (5.2 MiB)
        Spare parts (795.3 KiB)
  • ELEKTROMATEN SE ATEX

    ELEKTROMATEN SE ATEX

    ELEKTROMATEN SE are special drives for counterbalanced sectional doors to be used in potentially explosive atmospheres. The drive unit is normally directly fitted to the door shaft.

    • SG50

      Output torque:  90 Nm

      • SE 9.24 Ex-e T3

        Technical data

        Technical data

        Output torque: 90 Nm
        Output speed: 24 rpm
        Hollow shaft (Ø): 25,4 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (957.5 KiB)
        Installation drawing (2.3 MiB)
        Installation instructions (6.0 MiB)
        Spare parts (660.1 KiB)
      • SE 9.24 Ex-de T4

        Technical data

        Technical data

        Output torque: 90 Nm
        Output speed: 24 rpm
        Hollow shaft (Ø): 25,4 mm
        Manual operation options: ▪ Emergency hand crank NHK
        Limit switch options: ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (957.5 KiB)
        Installation drawing (2.3 MiB)
        Installation instructions (4.9 MiB)
        Spare parts (660.1 KiB)
  • Door controls for ATEX

    TS ATEX

     

     

    ATEX door controls by GfA are designed for the special requirements of potentially explosive atmospheres. Depending on the version, they may be used inside or outside the hazardous area.

    • inside the Ex area

      TS ATEX for use inside the Ex area

      • TS 971-ATEX II 2 G/D

        Technical data

        Technical data

        Type of protection: II 2(1)G Ex db eb [ia Ga] IIC T6 Gb / II 2(1)D Ex tb [ia Ga] IIIC T85°C Db
        Supply voltage: 3~230 V, PE / 3N~400 V, PE /
        3~400 V, PE
        Operating frequency: 50 Hz / 60 Hz
        Mains supply ratings for
        external devices:
        ▪ 24 V DC / 0,35 A
        ▪ 230 V AC / 1,6 A
        Dimensions WxHxD: 338 x 540 x 228 mm
        Automatic door
        control for:
        Mechanical limit switch NES
        Operating modes: ▪ CLOSE/OPEN in hold-to-run mode
        ▪ CLOSE/OPEN in self-hold mode
        Features: ▪ With mains switch
        ▪ With Motor overload protection
        ▪ Evaluator for a safety edge
          system 8k2
        ▪ Evaluator for Slack rope /
          pass door switch contact  
        ▪ Integrated Switch device
          for photo cell detection
        Downloads
        Catalogue sheet (221.6 KiB)
        Installation drawing (287.2 KiB)
        Installation instructions (1.0 MiB)
        Fault guide (310.2 KiB)
    • outside the Ex area

      TS ATEX for use outside the Ex area

      • TS 971-Hold-to-run ATEX

        Technical data

        Technical data

        Type of
        protection:
        To be used outside the explosion proof area, with
        zener barrier
        II 3(1)G Ex nA [ia Ga] IIC/IIB T4 Gc / II(1)D [Ex ia Da] IIIC for
        slack rope / pass door switch
        Supply voltage: 3~230 V, PE / 3N~400 V, PE / 3~400 V, PE
        Operating frequency: 50 Hz / 60 Hz
        Mains  supply ratings
        for external
        devices:
        ▪ 24 V DC / 0,35 A
        ▪ 230 V AC / 1,6 A
        Dimensions
        WxHxD:
        250 x 375 x 188 mm
        Hold-to-run door control for: Mechanical limit switch NES
        Operating
        modes:
        ▪ CLOSE/OPEN in hold-to-run mode
        ▪ OPEN in self-hold mode
        Features: ▪ With mains switch
        ▪ With Motor overload protection
        ▪ Evaluator for slack rope /
          pass door switch contact
        Downloads
        Catalogue sheet (221.6 KiB)
        Installation drawing (302.0 KiB)
        Installation instructions (1.0 MiB)
        Fault guide (310.2 KiB)
      • TS 971-Automatic ATEX

        Technical data

        Technical data

        Type of
        protection:
        To be used outside the explosion
        proof area, with zener barrier
        II 3(1)G Ex nA [ia Ga] IIC/IIB T4
        Gc / II (1) D [Ex ia Da] IIIC for evaluation of a
        safety edge system 8k2,
        slack rope / pass door switch
        and a photo cell detection
        Supply voltage: 3~230 V, PE / 3N~400 V, PE /
        3~400 V, PE
        Operating frequency: 50 Hz / 60 Hz
        Mains supply
        ratings
        for external
        devices:
        ▪ 24 V DC / 0,35 A
        ▪ 230 V AC / 1,6 A
        Dimensions
        WxHxD:
        375 x 375 x 188 mm
        Automatic door
        control for:
        Mechanical limit switch NES
        Operating
        modes:
        ▪ CLOSE/OPEN in hold-to-run mode
        ▪ CLOSE/OPEN in self-hold mode
        Features: ▪ With mains switch
        ▪ With Motor overload protection
        ▪ Evaluator for a safety edge
          system 8k2
        ▪ Evaluator for a slack rope /
          pass door switch contact
        ▪ Integrated switch device for
          photo cell detection
        Downloads
        Catalogue sheet (221.6 KiB)
        Installation drawing (359.8 KiB)
        Installation instructions (1.2 MiB)
        Fault guide (310.2 KiB)
  • ELEKTROMATEN FS

    ELEKTROMATEN FS

    ELEKTROMATEN FS are special drives for fire shutters. The door shaft is driven by a chain-transmission. For rising loads a safety brake of the appropriate size must be fitted.

    • FS 15

      Output torque:  150 Nm

      • FS 15.20

        Technical data

        Technical data

        Output torque: 150 Nm
        Output speed: 20 (23) rpm
        Output shaft (Ø): 25 mm
        Brake: Magnetic brake
        Limit switch options: ▪ Digital limit switch DES
        ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (759.2 KiB)
        Installation drawing (424.8 KiB)
        Installation instructions (2.2 MiB)
    • FS 25

      Output torque:  250 Nm

      • FS 25.20

        Technical data

        Technical data

        Output torque: 250 Nm
        Output speed: 20 (23) rpm
        Output shaft (Ø): 30 mm
        Brake: Universal brake UB
        Limit switch options: ▪ Digital limit switch DES
        ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (759.2 KiB)
        Installation drawing (457.1 KiB)
        Installation instructions (2.1 MiB)
    • FS 50

      Output torque:  500 Nm

      • FS 50.20

        Technical data

        Technical data

        Output torque: 500 Nm
        Output speed: 20 (23) rpm
        Output shaft (Ø): 40 mm
        Brake: Universal brake UB
        Limit switch options: ▪ Digital limit switch DES
        ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (759.2 KiB)
        Installation drawing (448.7 KiB)
        Installation instructions (2.1 MiB)
    • FS 110

      Output torque:  1100 Nm

      • FS 110.18

        Technical data

        Technical data

        Output torque: 1100 Nm
        Output speed: 18 (23) rpm
        Output shaft (Ø): 50 mm
        Brake: Universal brake UB
        Limit switch options: ▪ Digital limit switch DES
        ▪ Mechanical limit switch NES
        Downloads
        Catalogue sheet (759.2 KiB)
        Installation drawing (480.0 KiB)
        Installation instructions (2.1 MiB)

General Terms and Conditions of Purchase

General Terms of Sale and Delivery

Privacy Policy
Terms of use

Contact

Imprint