“Safedrive” ELEKTROMATEN SI are drives for industrial doors to be used in potentially explosive atmospheres - which require an anti-fallback device. The patented safety brake is built into the gear. The drive unit is fitted directly to the door shaft.
-
ELEKTROMATEN SI ATEX
ELEKTROMATEN SI ATEX
-
SG85F
Output torques: 250 - 400 Nm
-
SI 25.15 Ex-e T3
Technical data
Technical data
Output torque: 250 Nm Output speed: 15 rpm Hollow shaft (Ø): 30 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
SI 25.15 Ex-de T4
Technical data
Technical data
Output torque: 250 Nm Output speed: 15 rpm Hollow shaft (Ø): 30 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
SI 40.15 Ex-e T3
Technical data
Technical data
Output torque: 400 Nm Output speed: 15 rpm Hollow shaft (Ø): 40 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
SI 40.15 Ex-de T4
Technical data
Technical data
Output torque: 400 Nm Output speed: 15 rpm Hollow shaft (Ø): 40 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
SI 55.12 Ex-de T4
Technical data
Technical data
Output torque: 550 Nm Output speed: 12 rpm Hollow shaft (Ø): 40 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
SI 25.15 Ex-e T3
-
SG115F
Output torque: 800 Nm
-
SI 80.12 Ex-de T4
Technical data
Technical data
Output torque: 800 Nm Output speed: 12 rpm Hollow shaft (Ø): 55 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
SI 80.12 Ex-de T4
-
SG85F
-
ELEKTROMATEN KE ATEX
ELEKTROMATEN KE ATEX
ELEKTROMATEN KE are drives for industrial doors to be used in potentially explosive atmospheres. The door shaft is driven by a chain-transmission. To prevent doors falling back a safety brake of the appropriate size is required.
-
SG50
Output torque: 90 Nm
-
KE 9.24 Ex-e T3
Technical data
Technical data
Output torque: 90 Nm Output speed: 24 rpm Output shaft (Ø): 25 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
KE 9.24 Ex-de T4
Technical data
Technical data
Output torque: 90 Nm Output speed: 24 rpm Output shaft (Ø): 25 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
KE 9.24 Ex-e T3
-
SG85
Output torque: 350 Nm
-
KE 35.24 Ex-de T4
Technical data
Technical data
Output torque: 350 Nm Output speed: 24 rpm Output shaft (Ø): 40 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
KE 35.24 Ex-de T4
-
SG115
Output torque: 800 Nm
-
KE 80.12 Ex-de T4
Technical data
Technical data
Output torque: 800 Nm Output speed: 12 rpm Output shaft (Ø): 55 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
KE 80.12 Ex-de T4
-
SG50
-
ELEKTROMATEN SE ATEX
ELEKTROMATEN SE ATEX
ELEKTROMATEN SE are special drives for counterbalanced sectional doors to be used in potentially explosive atmospheres. The drive unit is normally directly fitted to the door shaft.
-
SG50
Output torque: 90 Nm
-
SE 9.24 Ex-e T3
Technical data
Technical data
Output torque: 90 Nm Output speed: 24 rpm Hollow shaft (Ø): 25,4 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
SE 9.24 Ex-de T4
Technical data
Technical data
Output torque: 90 Nm Output speed: 24 rpm Hollow shaft (Ø): 25,4 mm Manual operation options: ▪ Emergency hand crank NHK Limit switch options: ▪ Mechanical limit switch NES Downloads
-
SE 9.24 Ex-e T3
-
SG50
-
Door controls for ATEX
TS ATEX
ATEX door controls by GfA are designed for the special requirements of potentially explosive atmospheres. Depending on the version, they may be used inside or outside the hazardous area.
-
inside the Ex area
TS ATEX for use inside the Ex area
-
TS 971-ATEX II 2 G/D
Technical data
Technical data
Type of protection: II 2(1)G Ex db eb [ia Ga] IIC T6 Gb / II 2(1)D Ex tb [ia Ga] IIIC T85°C Db Supply voltage: 3~230 V, PE / 3N~400 V, PE /
3~400 V, PEOperating frequency: 50 Hz / 60 Hz Mains supply ratings for
external devices:▪ 24 V DC / 0,35 A
▪ 230 V AC / 1,6 ADimensions WxHxD: 338 x 540 x 228 mm Automatic door
control for:Mechanical limit switch NES Operating modes: ▪ CLOSE/OPEN in hold-to-run mode
▪ CLOSE/OPEN in self-hold modeFeatures: ▪ With mains switch
▪ With Motor overload protection
▪ Evaluator for a safety edge
system 8k2
▪ Evaluator for Slack rope /
pass door switch contact
▪ Integrated Switch device
for photo cell detectionDownloads
-
ATEX Reversing starter
Technical data
Technical data
Explosion protection: Ex d [ia] IIB T5/Ex td A21 T95°C Supply voltage: 3N~400V, PE Operating frequency: 50 Hz Dimensions WxHxD: 370 x 270 x 208 mm Automatic door
control for:Dead man Operating modes: ▪ CLOSE/OPEN in hold-to-run
modeFeatures: ▪ With Motor overload
protection
▪ Wall mounting reversing starter
without push buttons
▪ Intrinsic safe circuits for push
buttons and Interlock switches
enabling the use of Non Atex
push button station and
Non Atex Interlock switches
e.g. Shootbolt InterlocksDownloads
-
TS 971-ATEX II 2 G/D
-
outside the Ex area
TS ATEX for use outside the Ex area
-
TS 971-Hold-to-run ATEX
Technical data
Technical data
Type of
protection:To be used outside the explosion proof area, with
zener barrier
II 3(1)G Ex nA [ia Ga] IIC/IIB T4 Gc / II(1)D [Ex ia Da] IIIC for
slack rope / pass door switchSupply voltage: 3~230 V, PE / 3N~400 V, PE / 3~400 V, PE Operating frequency: 50 Hz / 60 Hz Mains supply ratings
for external
devices:▪ 24 V DC / 0,35 A
▪ 230 V AC / 1,6 ADimensions
WxHxD:250 x 375 x 188 mm Hold-to-run door control for: Mechanical limit switch NES Operating
modes:▪ CLOSE/OPEN in hold-to-run mode
▪ OPEN in self-hold modeFeatures: ▪ With mains switch
▪ With Motor overload protection
▪ Evaluator for slack rope /
pass door switch contactDownloads
-
TS 971-Automatic ATEX
Technical data
Technical data
Type of
protection:To be used outside the explosion
proof area, with zener barrier
II 3(1)G Ex nA [ia Ga] IIC/IIB T4
Gc / II (1) D [Ex ia Da] IIIC for evaluation of a
safety edge system 8k2,
slack rope / pass door switch
and a photo cell detectionSupply voltage: 3~230 V, PE / 3N~400 V, PE /
3~400 V, PEOperating frequency: 50 Hz / 60 Hz Mains supply
ratings
for external
devices:▪ 24 V DC / 0,35 A
▪ 230 V AC / 1,6 ADimensions
WxHxD:375 x 375 x 188 mm Automatic door
control for:Mechanical limit switch NES Operating
modes:▪ CLOSE/OPEN in hold-to-run mode
▪ CLOSE/OPEN in self-hold modeFeatures: ▪ With mains switch
▪ With Motor overload protection
▪ Evaluator for a safety edge
system 8k2
▪ Evaluator for a slack rope /
pass door switch contact
▪ Integrated switch device for
photo cell detectionDownloads
-
TS 971-Hold-to-run ATEX
-
Accessories for ATEX
TS ATEX Accessories for Atex
-
Push button station
Technical data
Technical data
Control device: Nr. 51 Ex aP Dimensions W x H x D: 80 x 185 x 85 mm Type of protection Gas:
Type of protection Dust:II 2 G Ex db eb IIC T6 Gb
II 2 D Ex tb IIIC T80 °C DbPart no.: 40009665 Downloads
-
Photo beam
Technical data
Technical data
Explosion protection: II 2 G Ex ia IIC T4 20m range for use for use with TS 971 ATEX automatic controls. Not suitable for dust hazardous areas. Part no.: 30005490 -
Isolator switch
Technical data
Technical data
Explosion protection: II 2 G Ex ed IIC T6
II 2 D Ex tD A21 IP66 T80°CDimensions W x H x D: 112 x 205 x 135 mm
16 AmpPart no.: 40014087 Downloads
-
Junction box
Technical data
Technical data
Explosion protection: II 2 G Ex ia IIC T6
II 2 D IP66 T80°CDimensions W x H x D: 112 x 205 x 135 mm
IP66Part no.: 40014675 Downloads
-
Cable glands
Technical data
Technical data
Explosion protection: II 2 G Ex-e II / II 2 D IP66 Part no.: M16 - 40013344
M20 - 40013332Downloads
-
Push button station
-
inside the Ex area
-
Safety brakes for ATEX
FG ATEX
Safety brakes FG are devices for all rising loads to be prevented from falling back in potentially explosive atmospheres.
-
FG 40 up to FG 120
Torques: 40 - 120 Nm
-
FG 40-30 / ATEX-T3
Technical data
Technical data
Max. torque: 400 Nm Max. operating speed OPEN / CLOSE: 24 / 24 rpm Output shaft / hollow shaft (Ø): 30 mm Locking torque: 1150 Nm Downloads
-
FG 80-40 / ATEX-T3
Technical data
Technical data
Max. torque: 800 Nm Max. operating speed OPEN / CLOSE: 24 / 24 rpm Output shaft / hollow shaft (Ø): 40 mm Locking torque: 2260 Nm Downloads
-
FG 120-50 /ATEX-T3
Technical data
Technical data
Max. torque: 1200 Nm Max. operating speed OPEN / CLOSE: 24 / 24 rpm Output shaft / hollow shaft (Ø): 50 mm Locking torque: 3530 Nm Downloads
-
FG 40-30 / ATEX-T3
-
FG 40 up to FG 120
-
ELEKTROMATEN SI IP65i
ELEKTROMATEN SI IP65i
“Safedrive®” ELEKTROMATEN IP65i is an enhanced level of protection for drive units that are to be sited in harsh environments where high humidity and mildly corrosive atmospheres may be encountered - which require an anti-fallback device. The patented safety brake is built into the gear. The drive unit is fitted directly to the door shaft.
-
SG85F
Output torques: 350 - 650 Nm
-
SI 35.15 IP65i
Technical data
Technical data
Output torque: 350 Nm Output speed: 15 rpm Hollow shaft (Ø): 40 mm Manual operation options: ▪ Hand chain operator KNH Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SI 45.15 IP65i
Technical data
Technical data
Output torque: 450 Nm Output speed: 15 rpm Hollow shaft (Ø): 40 mm Manual operation options: ▪ Hand chain operator KNH Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SI 55.15 IP65i
Technical data
Technical data
Output torque: 550 Nm Output speed: 15 rpm Hollow shaft (Ø): 40 mm Manual operation options: ▪ Hand chain operator KNH Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SI 65.15 IP65i
Technical data
Technical data
Output torque: 650 Nm Output speed: 15 rpm Hollow shaft (Ø): 40 mm Manual operation options: ▪ Hand chain operator KNH Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SI 35.15 IP65i
-
SG115F
Output torques: 850 - 1400 Nm
-
SI 85.10 IP65i
Technical data
Technical data
Output torque: 850 Nm Output speed: 10 rpm Hollow shaft (Ø): 55 mm Manual operation options: ▪ Hand chain operator KNH Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SI 100.10 IP65i
Technical data
Technical data
Output torque: 1000 Nm Output speed: 10 rpm Hollow shaft (Ø): 55 mm Manual operation options: ▪ Hand chain operator KNH Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SI 140.07 IP65i
Technical data
Technical data
Output torque: 1400 Nm Output speed: 7 rpm Hollow shaft (Ø): 55 mm Manual operation options: ▪ Hand chain operator KNH Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SI 85.10 IP65i
-
SG85F
-
ELEKTROMATEN SE IP65i
ELEKTROMATEN SE IP65i
Ranger 91 IP65i is an enhanced level of protection for drive units that are to be sited in harsh environments where high humidity and mildly corrosive atmospheres may be encountered, the drive is for counterbalanced sectional doors. The drive unit is normally directly fitted to the door shaft.
-
SG50
Output torques: 90 Nm
-
SE 9.24 IP65i
Technical data
Technical data
Output torque: 90 Nm Output speed: 24 rpm Hollow shaft (Ø): 1" (25.4 mm) Manual operation options: ▪ Rapid hand chain operator SK Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SE 9.30 IP65i
Technical data
Technical data
Output torque: 90 Nm Output speed: 30 rpm Hollow shaft (Ø): 1" (25.4 mm) Manual operation options: ▪ Rapid hand chain operator SK Limit switch options: ▪ Totally encapsulated
limit switch NESDownloads
-
SE 9.24 IP65i
-
SG50
-
IP65i Door controls
IP65i Door controls
TS959 or TS971 Control panel mounted in an IP66 GRP enclosure with a window. The panel incorporates a thermostatically controlled anti-condensation heater. Interconnection cables are available in 3m, 5m, 7m, 9m & 13m lengths.
-
Door
IP65i Controls
-
TS 959 with Anti-condensation heater
Technical data
Technical data
Part Number: 20003940 00001 Part: CC61090 Downloads
-
TS 971 with Anti-condensation heater
Technical data
Technical data
Part Number: 20003935 00001 Part: CC61071 Downloads
-
Custom length cable w M40/M20 DES
Technical data
Technical data
Part Number: Part: Description: 20003955 00150 GE23955/015 1.5m cable with M40/M20 gland (DES) 20003955 00300 GE23955/030 3m cable with M40/M20 gland (DES) 20003955 00500 GE23955/050 5m cable with M40/M20 gland (DES) 20003955 00700 GE23955/070 7m cable with M40/M20 gland (DES) 20003955 00900 GE23955/090 9m cable with M40/M20 gland (DES) 20003955 01300 GE23955/130 13m cable with M40/M20 gland (DES) Other lengths are available on request, please contact sales for more information
Downloads
-
Custom length cable w M40/M20 NES
Technical data
Technical data
Part Number: Part: Description: 20004117 00300 GE24117/030 3m cable with M40/M20 gland (NES) 20004117 00500 GE24117/050 5m cable with M40/M20 gland (NES) 20004117 00700 GE24117/070 7m cable with M40/M20 gland (NES) 20004117 00900 GE24117/090 9m cable with M40/M20 gland (NES) 20004117 01300 GE24117/130 13m cable with M40/M20 gland (NES) Other lengths are available on request, please contact sales for more information
Downloads
-
TS 959 with Anti-condensation heater
-
Door
-
ELEKTROMATEN FS
ELEKTROMATEN FS
ELEKTROMATEN FS are special drives for fire shutters. The door shaft is driven by a chain-transmission. For rising loads a safety brake of the appropriate size must be fitted.
-
FS 15
Output torque: 150 Nm
-
FS 15.20
Technical data
Technical data
Output torque: 150 Nm Output speed: 20 (23) rpm Output shaft (Ø): 25 mm Brake: Magnetic brake Limit switch options: ▪ Digital limit switch DES
▪ Mechanical limit switch NESDownloads
-
FS 15.20 new
Technical data
Technical data
Output torque: 150 Nm Output speed: 20 (23) rpm Output shaft (Ø): 25 mm Brake: Magnetic brake Limit switch options: ▪ Digital limit switch DES
▪ Mechanical limit switch NESDownloads
-
FS 15.20
-
FS 25
Output torque: 250 Nm
-
FS 25.20
Technical data
Technical data
Output torque: 250 Nm Output speed: 20 (23) rpm Output shaft (Ø): 30 mm Brake: Universal brake UB Limit switch options: ▪ Digital limit switch DES
▪ Mechanical limit switch NESDownloads
-
FS 25.20
-
FS 50
Output torque: 500 Nm
-
FS 50.20
Technical data
Technical data
Output torque: 500 Nm Output speed: 20 (23) rpm Output shaft (Ø): 40 mm Brake: Universal brake UB Limit switch options: ▪ Digital limit switch DES
▪ Mechanical limit switch NESDownloads
-
FS 50.20
-
FS 110
Output torque: 1100 Nm
-
FS 110.18
Technical data
Technical data
Output torque: 1100 Nm Output speed: 18 (23) rpm Output shaft (Ø): 50 mm Brake: Universal brake UB Limit switch options: ▪ Digital limit switch DES
▪ Mechanical limit switch NESDownloads
-
FS 110.18
-
FS 15
-
DLA Fire Shutter Drive
UK DLA Fire Shutter Drive
-
DLA150W
-
DLA 150WAC
Technical data
Technical data
Part number: 10004544 00002 Description: DLA150W 1~ BIS (Actuator) Output torque: 23 Nm Output speed: 24 rpm Motor power: 75 W Limit range turns: 70 Supply voltage: 230V 1~50Hz Motor rated current: 1.4 A Sprocket fitted: 10T 1/2" Protection: IP20 Fuse link attached: No Downloads
-
DLA 150WACF
Technical data
Technical data
Part number: 10004544 00002 Description: DLA150W 1~ BIS (Act-F/Link) Output torque: 23 Nm Output speed: 24 rpm Motor power: 75 W Limit range turns: 70 Supply voltage: 230V 1~50Hz Motor rated current: 1.4 A Sprocket fitted: 10T 1/2" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 150WF
Technical data
Technical data
Part number: 10004544 00002 Description: DLA150W 1~ BIS (Rem. F/Link) Output torque: 23 Nm Output speed: 24 rpm Motor power: 75 W Limit range turns: 70 Supply voltage: 230V 1~50Hz Motor rated current: 1.4 A Sprocket fitted: 10T 1/2" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 150WAC
-
DLA250W
-
DLA 250WAC
Technical data
Technical data
Part number: 10004555 00003 Description: DLA250W 1~ (24V Actuator), BOS Output torque: 47 Nm Output speed: 24 rpm Motor power: 150 W Limit range turns: 70 Supply voltage: 230V 1~50Hz Motor rated current: 2.0 A Sprocket fitted: 11T 1/2" Protection: IP20 Fuse link attached: No Downloads
-
DLA 250WACF
Technical data
Technical data
Part number: 10004555 00002 Description: DLA250W 1~ BOS (Act-F/Link) Output torque: 47 Nm Output speed: 24 rpm Motor power: 150 W Limit range turns: 70 turns Supply voltage: 230V 1~50Hz Motor rated current: 2.0 A Sprocket fitted: 11T 1/2" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 250WF
Technical data
Technical data
Part number: 10004559 00001 Description: DLA250W 1~ BOS (Rem. F/Link) Output torque: 47 Nm Output speed: 24 rpm Motor power: 150 W Limit range turns: 70 Supply voltage: 230V 1~50Hz Motor rated current: 2.0 A Sprocket fitted: 11T 1/2" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 250WAC
-
DLA500W
-
DLA 500WAC
Technical data
Technical data
Part number: 10004566 00002 Description: DLA500W 1~ BOS (Actuator) Output torque: 100 Nm Output speed: 24 rpm Motor power: 350 W Limit range turns: 40 Supply voltage: 230V 1~50Hz Motor rated current: 4.4 A Sprocket fitted: 11T 1/2" Protection: IP20 Fuse link attached: No Downloads
-
DLA 500WACF
Technical data
Technical data
Part number: 10004566 00003 Description: DLA500W 1~ BOS (Act-F/Link) Output torque: 100 Nm Output speed: 24 rpm Motor power: 350 W Limit range turns: 40 Supply voltage: 230V 1~50Hz Motor rated current: 4.4A Sprocket fitted: 11T 1/2" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 500WF
Technical data
Technical data
Part number: 10004568 00001 Description: DLA500W 1~ BOS (Rem. F/Link) Output torque: 100 Nm Output speed: 24 rpm Motor power: 350 W Limit range turns: 40 Supply voltage: 230V 1~50Hz Motor rated current: 4.4 A Sprocket fitted: 11T 1/2" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 500WAC
-
DLA600
-
DLA 600AC
Technical data
Technical data
Part number: 10005081 00001 Description: DLA600 3~ (24V Actuator), BOS Output torque: 108 Nm Output speed: 24 rpm Motor power: 400 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 1.0 A Sprocket fitted: 10T 5/8" Protection: IP20 Fuse link attached: No Downloads
-
DLA 600ACF
Technical data
Technical data
Part number: 10005081 00002 Description: DLA600 3~ BOS (Act-F/Link) Output torque: 108 Nm Output speed: 24 rpm Motor power: 400 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 1.0 A Sprocket fitted: 10T 5/8" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 600F
Technical data
Technical data
Part number: 10004578 00001 Description: DLA600 3~ BOS (Rem. F/Link) Output torque: 108 Nm Output speed: 24 rpm Motor power: 400 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 1.0 A Sprocket fitted: 10T 5/8" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 600AC
-
DLA800
-
DLA 800AC
Technical data
Technical data
Part number: 10004584 00006 Description: DLA800 3~ BOS (Actuator) Output torque: 140 Nm Output speed: 17 rpm Motor power: 540 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 1.5 A Sprocket fitted: 11T 3/4" Protection: IP20 Fuse link attached: No Downloads
-
DLA 800ACF
Technical data
Technical data
Part number: 10004584 00007 Description: DLA800 3~ BOS (Actuator) Output torque: 140 Nm Output speed: 17 rpm Motor power: 540 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 1.5 A Sprocket fitted: 11T 3/4" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 800F
Technical data
Technical data
Part number: 10004586 00001 Description: DLA800 3~ BOS (Rem. F/Link) Output torque: 140 Nm Output speed: 17 rpm Motor power: 540 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 1.5 A Sprocket fitted: 11T 3/4" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 800AC
-
DLA1000
-
DLA 1000AC
Technical data
Technical data
Part number: 10005082 00001 Description: DLA1000 3~ BOS (Actuator) Output torque: 300 Nm Output speed: 10 rpm Motor power: 760 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 0.8 A Sprocket fitted: 11T 3/4" Protection: IP20 Fuse link attached: No Downloads
-
DLA 1000ACF
Technical data
Technical data
Part number: 10005082 00002 Description: DLA1000 3~ BOS (Act-F/Link) Output torque: 300 Nm Output speed: 10 rpm Motor power: 760 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 0.8 A Sprocket fitted: 11T 3/4" Protection: IP20 Fuse link attached: No Downloads
-
DLA 1000F
Technical data
Technical data
Part number: 14401800 00003 Description: DLA1000 3~ BOS (Rem. F/Link) Output torque: 300 Nm Output speed: 10 rpm Motor power: 760 W Limit range turns: 40 Supply voltage: 400V 3~50Hz Motor rated current: 0.8 A Sprocket fitted: 11T 3/4" Protection: IP20 Fuse link attached: Yes Downloads
-
DLA 1000AC
-
Controllers for DLA Drives
DLA Drives
-
Fire Control Panel
Technical data
Technical data
Part: CM60581/C Part Number: 20003821 00002 Downloads
-
FCP03 Repeater
Technical data
Technical data
Part: CM60581R Part Number: 20003826 00001
-
Fire Control Panel
-
DLA150W