“Safedrive” ELEKTROMATEN SI are drives for industrial doors to be used in potentially explosive atmospheres - which require an anti-fallback device. The patented safety brake is built into the gear. The drive unit is fitted directly to the door shaft.
| Output torque: | 250 Nm |
| Output speed: | 15 rpm |
| Hollow shaft (Ø): | 30 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 250 Nm |
| Output speed: | 15 rpm |
| Hollow shaft (Ø): | 30 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 400 Nm |
| Output speed: | 15 rpm |
| Hollow shaft (Ø): | 40 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 400 Nm |
| Output speed: | 15 rpm |
| Hollow shaft (Ø): | 40 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 550 Nm |
| Output speed: | 12 rpm |
| Hollow shaft (Ø): | 40 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 800 Nm |
| Output speed: | 12 rpm |
| Hollow shaft (Ø): | 55 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
ELEKTROMATEN KE are drives for industrial doors to be used in potentially explosive atmospheres. The door shaft is driven by a chain-transmission. To prevent doors falling back a safety brake of the appropriate size is required.
| Output torque: | 90 Nm |
| Output speed: | 24 rpm |
| Output shaft (Ø): | 25 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 90 Nm |
| Output speed: | 24 rpm |
| Output shaft (Ø): | 25 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 350 Nm |
| Output speed: | 24 rpm |
| Output shaft (Ø): | 40 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 800 Nm |
| Output speed: | 12 rpm |
| Output shaft (Ø): | 55 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
ELEKTROMATEN SE are special drives for counterbalanced sectional doors to be used in potentially explosive atmospheres. The drive unit is normally directly fitted to the door shaft.
| Output torque: | 90 Nm |
| Output speed: | 24 rpm |
| Hollow shaft (Ø): | 25,4 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
| Output torque: | 90 Nm |
| Output speed: | 24 rpm |
| Hollow shaft (Ø): | 25,4 mm |
| Manual operation options: | ▪ Emergency hand crank NHK |
| Limit switch options: | ▪ Mechanical limit switch NES |
ATEX door controls by GfA are designed for the special requirements of potentially explosive atmospheres. Depending on the version, they may be used inside or outside the hazardous area.
| Type of protection: | II 2(1)G Ex db eb [ia Ga] IIC T6 Gb / II 2(1)D Ex tb [ia Ga] IIIC T85°C Db |
| Supply voltage: | 3~230 V, PE / 3N~400 V, PE / 3~400 V, PE |
| Operating frequency: | 50 Hz / 60 Hz |
| Mains supply ratings for external devices: |
▪ 24 V DC / 0,35 A ▪ 230 V AC / 1,6 A |
| Dimensions WxHxD: | 338 x 540 x 228 mm |
| Automatic door control for: |
Mechanical limit switch NES |
| Operating modes: | ▪ CLOSE/OPEN in hold-to-run mode ▪ CLOSE/OPEN in self-hold mode |
| Features: | ▪ With mains switch ▪ With Motor overload protection ▪ Evaluator for a safety edge system 8k2 ▪ Evaluator for Slack rope / pass door switch contact ▪ Integrated Switch device for photo cell detection |
| Explosion protection: | Ex d [ia] IIB T5/Ex td A21 T95°C |
| Supply voltage: | 3N~400V, PE |
| Operating frequency: | 50 Hz |
| Dimensions WxHxD: | 370 x 270 x 208 mm |
| Automatic door control for: |
Dead man |
| Operating modes: | ▪ CLOSE/OPEN in hold-to-run mode |
| Features: | ▪ With Motor overload protection ▪ Wall mounting reversing starter without push buttons ▪ Intrinsic safe circuits for push buttons and Interlock switches enabling the use of Non Atex push button station and Non Atex Interlock switches e.g. Shootbolt Interlocks |
| Type of protection: |
To be used outside the explosion proof area, with zener barrier II 3(1)G Ex nA [ia Ga] IIC/IIB T4 Gc / II(1)D [Ex ia Da] IIIC for slack rope / pass door switch |
| Supply voltage: | 3~230 V, PE / 3N~400 V, PE / 3~400 V, PE |
| Operating frequency: | 50 Hz / 60 Hz |
| Mains supply ratings for external devices: |
▪ 24 V DC / 0,35 A ▪ 230 V AC / 1,6 A |
| Dimensions WxHxD: |
250 x 375 x 188 mm |
| Hold-to-run door control for: | Mechanical limit switch NES |
| Operating modes: |
▪ CLOSE/OPEN in hold-to-run mode ▪ OPEN in self-hold mode |
| Features: | ▪ With mains switch ▪ With Motor overload protection ▪ Evaluator for slack rope / pass door switch contact |
| Type of protection: |
To be used outside the explosion proof area, with zener barrier II 3(1)G Ex nA [ia Ga] IIC/IIB T4 Gc / II (1) D [Ex ia Da] IIIC for evaluation of a safety edge system 8k2, slack rope / pass door switch and a photo cell detection |
| Supply voltage: | 3~230 V, PE / 3N~400 V, PE / 3~400 V, PE |
| Operating frequency: | 50 Hz / 60 Hz |
| Mains supply ratings for external devices: |
▪ 24 V DC / 0,35 A ▪ 230 V AC / 1,6 A |
| Dimensions WxHxD: |
375 x 375 x 188 mm |
| Automatic door control for: |
Mechanical limit switch NES |
| Operating modes: |
▪ CLOSE/OPEN in hold-to-run mode ▪ CLOSE/OPEN in self-hold mode |
| Features: | ▪ With mains switch ▪ With Motor overload protection ▪ Evaluator for a safety edge system 8k2 ▪ Evaluator for a slack rope / pass door switch contact ▪ Integrated switch device for photo cell detection |
| Control device: | Nr. 51 Ex aP |
| Dimensions W x H x D: | 80 x 185 x 85 mm |
| Type of protection Gas: Type of protection Dust: |
II 2 G Ex db eb IIC T6 Gb II 2 D Ex tb IIIC T80 °C Db |
| Part no.: | 40009665 |
| Explosion protection: | II 2 G Ex ia IIC T4 |
| 20m range for use for use with TS 971 ATEX automatic controls. Not suitable for dust hazardous areas. | |
| Part no.: | 30005490 |
| Explosion protection: | II 2 G Ex ed IIC T6 II 2 D Ex tD A21 IP66 T80°C |
| Dimensions W x H x D: | 112 x 205 x 135 mm 16 Amp |
| Part no.: | 40014087 |
| Explosion protection: | II 2 G Ex ia IIC T6 II 2 D IP66 T80°C |
| Dimensions W x H x D: | 112 x 205 x 135 mm IP66 |
| Part no.: | 40014675 |
| Explosion protection: | II 2 G Ex-e II / II 2 D IP66 |
| Part no.: | M16 - 40013344 M20 - 40013332 |
Safety brakes FG are devices for all rising loads to be prevented from falling back in potentially explosive atmospheres.
| Max. torque: | 400 Nm |
| Max. operating speed OPEN / CLOSE: | 24 / 24 rpm |
| Output shaft / hollow shaft (Ø): | 30 mm |
| Locking torque: | 1150 Nm |
| Max. torque: | 800 Nm |
| Max. operating speed OPEN / CLOSE: | 24 / 24 rpm |
| Output shaft / hollow shaft (Ø): | 40 mm |
| Locking torque: | 2260 Nm |
| Max. torque: | 1200 Nm |
| Max. operating speed OPEN / CLOSE: | 24 / 24 rpm |
| Output shaft / hollow shaft (Ø): | 50 mm |
| Locking torque: | 3530 Nm |
“Safedrive®” ELEKTROMATEN IP65i is an enhanced level of protection for drive units that are to be sited in harsh environments where high humidity and mildly corrosive atmospheres may be encountered - which require an anti-fallback device. The patented safety brake is built into the gear. The drive unit is fitted directly to the door shaft.
| Output torque: | 350 Nm |
| Output speed: | 15 rpm |
| Hollow shaft (Ø): | 40 mm |
| Manual operation options: | ▪ Hand chain operator KNH |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
| Output torque: | 450 Nm |
| Output speed: | 15 rpm |
| Hollow shaft (Ø): | 40 mm |
| Manual operation options: | ▪ Hand chain operator KNH |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
| Output torque: | 550 Nm |
| Output speed: | 15 rpm |
| Hollow shaft (Ø): | 40 mm |
| Manual operation options: | ▪ Hand chain operator KNH |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
| Output torque: | 650 Nm |
| Output speed: | 15 rpm |
| Hollow shaft (Ø): | 40 mm |
| Manual operation options: | ▪ Hand chain operator KNH |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
| Output torque: | 850 Nm |
| Output speed: | 10 rpm |
| Hollow shaft (Ø): | 55 mm |
| Manual operation options: | ▪ Hand chain operator KNH |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
| Output torque: | 1000 Nm |
| Output speed: | 10 rpm |
| Hollow shaft (Ø): | 55 mm |
| Manual operation options: | ▪ Hand chain operator KNH |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
| Output torque: | 1400 Nm |
| Output speed: | 7 rpm |
| Hollow shaft (Ø): | 55 mm |
| Manual operation options: | ▪ Hand chain operator KNH |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
Ranger 91 IP65i is an enhanced level of protection for drive units that are to be sited in harsh environments where high humidity and mildly corrosive atmospheres may be encountered, the drive is for counterbalanced sectional doors. The drive unit is normally directly fitted to the door shaft.
| Output torque: | 90 Nm |
| Output speed: | 24 rpm |
| Hollow shaft (Ø): | 1" (25.4 mm) |
| Manual operation options: | ▪ Rapid hand chain operator SK |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
| Output torque: | 90 Nm |
| Output speed: | 30 rpm |
| Hollow shaft (Ø): | 1" (25.4 mm) |
| Manual operation options: | ▪ Rapid hand chain operator SK |
| Limit switch options: | ▪ Totally encapsulated limit switch NES |
TS959 or TS971 Control panel mounted in an IP66 GRP enclosure with a window. The panel incorporates a thermostatically controlled anti-condensation heater. Interconnection cables are available in 3m, 5m, 7m, 9m & 13m lengths.
| Part Number: | 20003940 00001 |
| Part: | CC61090 |
| Part Number: | 20003935 00001 |
| Part: | CC61071 |
| Part Number: | Part: | Description: | ||
| 20003955 00150 | GE23955/015 | 1.5m cable with M40/M20 gland (DES) | ||
| 20003955 00300 | GE23955/030 | 3m cable with M40/M20 gland (DES) | ||
| 20003955 00500 | GE23955/050 | 5m cable with M40/M20 gland (DES) | ||
| 20003955 00700 | GE23955/070 | 7m cable with M40/M20 gland (DES) | ||
| 20003955 00900 | GE23955/090 | 9m cable with M40/M20 gland (DES) | ||
| 20003955 01300 | GE23955/130 | 13m cable with M40/M20 gland (DES) |
Other lengths are available on request, please contact sales for more information
| Part Number: | Part: | Description: | ||
| 20004117 00300 | GE24117/030 | 3m cable with M40/M20 gland (NES) | ||
| 20004117 00500 | GE24117/050 | 5m cable with M40/M20 gland (NES) | ||
| 20004117 00700 | GE24117/070 | 7m cable with M40/M20 gland (NES) | ||
| 20004117 00900 | GE24117/090 | 9m cable with M40/M20 gland (NES) | ||
| 20004117 01300 | GE24117/130 | 13m cable with M40/M20 gland (NES) |
Other lengths are available on request, please contact sales for more information
ELEKTROMATEN FS are special drives for fire shutters. The door shaft is driven by a chain-transmission. For rising loads a safety brake of the appropriate size must be fitted.
| Output torque: | 150 Nm |
| Output speed: | 20 (23) rpm |
| Output shaft (Ø): | 25 mm |
| Brake: | Magnetic brake |
| Limit switch options: | ▪ Digital limit switch DES ▪ Mechanical limit switch NES |
| Output torque: | 150 Nm |
| Output speed: | 20 (23) rpm |
| Output shaft (Ø): | 25 mm |
| Brake: | Magnetic brake |
| Limit switch options: | ▪ Digital limit switch DES ▪ Mechanical limit switch NES |
| Output torque: | 250 Nm |
| Output speed: | 20 (23) rpm |
| Output shaft (Ø): | 30 mm |
| Brake: | Universal brake UB |
| Limit switch options: | ▪ Digital limit switch DES ▪ Mechanical limit switch NES |
| Output torque: | 500 Nm |
| Output speed: | 20 (23) rpm |
| Output shaft (Ø): | 40 mm |
| Brake: | Universal brake UB |
| Limit switch options: | ▪ Digital limit switch DES ▪ Mechanical limit switch NES |
| Output torque: | 1100 Nm |
| Output speed: | 18 (23) rpm |
| Output shaft (Ø): | 50 mm |
| Brake: | Universal brake UB |
| Limit switch options: | ▪ Digital limit switch DES ▪ Mechanical limit switch NES |
| Part number: | 10004544 00002 |
| Description: | DLA150W 1~ BIS (Actuator) |
| Output torque: | 23 Nm |
| Output speed: | 24 rpm |
| Motor power: | 75 W |
| Limit range turns: | 70 |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 1.4 A |
| Sprocket fitted: | 10T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | No |
| Part number: | 10004544 00002 |
| Description: | DLA150W 1~ BIS (Act-F/Link) |
| Output torque: | 23 Nm |
| Output speed: | 24 rpm |
| Motor power: | 75 W |
| Limit range turns: | 70 |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 1.4 A |
| Sprocket fitted: | 10T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10004544 00002 |
| Description: | DLA150W 1~ BIS (Rem. F/Link) |
| Output torque: | 23 Nm |
| Output speed: | 24 rpm |
| Motor power: | 75 W |
| Limit range turns: | 70 |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 1.4 A |
| Sprocket fitted: | 10T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10004555 00003 |
| Description: | DLA250W 1~ (24V Actuator), BOS |
| Output torque: | 47 Nm |
| Output speed: | 24 rpm |
| Motor power: | 150 W |
| Limit range turns: | 70 |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 2.0 A |
| Sprocket fitted: | 11T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | No |
| Part number: | 10004555 00002 |
| Description: | DLA250W 1~ BOS (Act-F/Link) |
| Output torque: | 47 Nm |
| Output speed: | 24 rpm |
| Motor power: | 150 W |
| Limit range turns: | 70 turns |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 2.0 A |
| Sprocket fitted: | 11T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10004559 00001 |
| Description: | DLA250W 1~ BOS (Rem. F/Link) |
| Output torque: | 47 Nm |
| Output speed: | 24 rpm |
| Motor power: | 150 W |
| Limit range turns: | 70 |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 2.0 A |
| Sprocket fitted: | 11T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10004566 00002 |
| Description: | DLA500W 1~ BOS (Actuator) |
| Output torque: | 100 Nm |
| Output speed: | 24 rpm |
| Motor power: | 350 W |
| Limit range turns: | 40 |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 4.4 A |
| Sprocket fitted: | 11T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | No |
| Part number: | 10004566 00003 |
| Description: | DLA500W 1~ BOS (Act-F/Link) |
| Output torque: | 100 Nm |
| Output speed: | 24 rpm |
| Motor power: | 350 W |
| Limit range turns: | 40 |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 4.4A |
| Sprocket fitted: | 11T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10004568 00001 |
| Description: | DLA500W 1~ BOS (Rem. F/Link) |
| Output torque: | 100 Nm |
| Output speed: | 24 rpm |
| Motor power: | 350 W |
| Limit range turns: | 40 |
| Supply voltage: | 230V 1~50Hz |
| Motor rated current: | 4.4 A |
| Sprocket fitted: | 11T 1/2" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10005081 00001 |
| Description: | DLA600 3~ (24V Actuator), BOS |
| Output torque: | 108 Nm |
| Output speed: | 24 rpm |
| Motor power: | 400 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 1.0 A |
| Sprocket fitted: | 10T 5/8" |
| Protection: | IP20 |
| Fuse link attached: | No |
| Part number: | 10005081 00002 |
| Description: | DLA600 3~ BOS (Act-F/Link) |
| Output torque: | 108 Nm |
| Output speed: | 24 rpm |
| Motor power: | 400 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 1.0 A |
| Sprocket fitted: | 10T 5/8" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10004578 00001 |
| Description: | DLA600 3~ BOS (Rem. F/Link) |
| Output torque: | 108 Nm |
| Output speed: | 24 rpm |
| Motor power: | 400 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 1.0 A |
| Sprocket fitted: | 10T 5/8" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10004584 00006 |
| Description: | DLA800 3~ BOS (Actuator) |
| Output torque: | 140 Nm |
| Output speed: | 17 rpm |
| Motor power: | 540 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 1.5 A |
| Sprocket fitted: | 11T 3/4" |
| Protection: | IP20 |
| Fuse link attached: | No |
| Part number: | 10004584 00007 |
| Description: | DLA800 3~ BOS (Actuator) |
| Output torque: | 140 Nm |
| Output speed: | 17 rpm |
| Motor power: | 540 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 1.5 A |
| Sprocket fitted: | 11T 3/4" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10004586 00001 |
| Description: | DLA800 3~ BOS (Rem. F/Link) |
| Output torque: | 140 Nm |
| Output speed: | 17 rpm |
| Motor power: | 540 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 1.5 A |
| Sprocket fitted: | 11T 3/4" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part number: | 10005082 00001 |
| Description: | DLA1000 3~ BOS (Actuator) |
| Output torque: | 300 Nm |
| Output speed: | 10 rpm |
| Motor power: | 760 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 0.8 A |
| Sprocket fitted: | 11T 3/4" |
| Protection: | IP20 |
| Fuse link attached: | No |
| Part number: | 10005082 00002 |
| Description: | DLA1000 3~ BOS (Act-F/Link) |
| Output torque: | 300 Nm |
| Output speed: | 10 rpm |
| Motor power: | 760 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 0.8 A |
| Sprocket fitted: | 11T 3/4" |
| Protection: | IP20 |
| Fuse link attached: | No |
| Part number: | 14401800 00003 |
| Description: | DLA1000 3~ BOS (Rem. F/Link) |
| Output torque: | 300 Nm |
| Output speed: | 10 rpm |
| Motor power: | 760 W |
| Limit range turns: | 40 |
| Supply voltage: | 400V 3~50Hz |
| Motor rated current: | 0.8 A |
| Sprocket fitted: | 11T 3/4" |
| Protection: | IP20 |
| Fuse link attached: | Yes |
| Part: | CM60581/C |
| Part Number: | 20003821 00002 |
| Part: | CM60581R |
| Part Number: | 20003826 00001 |
